«上一篇/Previous Article|本期目录/Table of Contents|下一篇/Next Article»

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:

40卷

期数:

2023年02期

页码:

26-39

栏目:

建筑结构

出版日期:

2023-03-30

文章信息/Info

Title:

Study on wind vibration performance of concrete-filled double skin steel tubular wind turbine tower

文章编号:

1673-2049(2023)02-0026-14

作者:

王文达,张丽丽,纪孙航,史艳莉

(兰州理工大学 土木工程学院,甘肃 兰州 730050)

Author(s):

WANG Wenda, ZHANG Lili, JI Sunhang, SHI Yanli

(School of Civil Engineering, Lanzhou University of Technology, Lanzhou 730050, Gansu, China)

关键词:

风力发电机组;  中空夹层钢管混凝土塔筒;  气动荷载;  自振特性;  动力响应

Keywords:

wind turbine;  concrete-filled double skin steel tubular tower;  aerodynamic load;  vibration characteristic;  dynamic response

分类号:

TU355

DOI:

10.19815/j.jace.2021.10076

文献标志码:

A

摘要:

传统风力发电机组塔架大多为锥形单管钢薄壁细长结构,此类结构在叶片转动及风荷载作用下易发生大的变形和振动。为克服传统风电塔自身发展的局限性并发挥中空夹层钢管混凝土(CFDST)结构优良的力学性能,基于某锥形钢塔筒,通过承载力等效提出CFDST塔筒结构形式,利用ABAQUS软件建立其风振性能有限元模型,对比了两种塔筒的振动模态。从时域和频域对二者在不同荷载工况下的动力响应特征进行对比分析,并对塔筒与叶片是否共振及瞬态冲击荷载下的振动进行了研究。结果表明:CFDST塔筒在保证原有钢塔筒抗弯承载力和刚度的同时,底部截面尺寸减小了25.6%,且不会与叶轮转动产生的谐波激励发生共振; 阻尼对风机塔筒位移、速度、加速度及应力响应幅值影响显著; 与钢塔筒相比,CFDST塔筒在正常运行荷载工况下峰值位移、加速度幅值和最大等效应力分别降低21.1%、30.2%和41.6%,而在暴风荷载工况下,分别减小14.4%、32.2%和36.3%; 研究成果可为相关塔筒的设计优化提供参考。

Abstract:

The conical single tube steel thin-walled slender structure is usually adopted in traditional wind turbine towers, which is prone to large deformation and vibration under the blade rotation and wind loads. In order to overcome the development limitations of the traditional steel towers and utilize the excellent mechanical properties of the concrete-filled double skin steel tube(CFDST)structure, a CFDST tower structure based on a certain conical steel tower tube was designed through the bearing capacity equivalence. Using ABAQUS software, the finite element models of the wind-induced vibration performance of the two towers were established and the vibration modes were compared. The dynamic response characteristics of the two towers under different load conditions were compared and analyzed in the time domain and frequency domain, and the vibrations of the tower and blades under transient impact load were also studied. The results show that the CFDST tower can reduce the bottom section size by 25.6% while ensuring the bending capacity and stiffness of the original steel tower tube and will not resonate with the harmonic excitation generated by the rotation of the blades. Damping has a significant impact on displacement, velocity, acceleration, and stress response amplitudes of the wind turbine tower. Compared with the steel tower, the peak displacement, acceleration amplitude and maximum equivalent stress of the CFDST tower under normal operating load conditions are reduced by 21.1%, 30.2% and 41.6%, while decreased by 14.4%, 32.2% and 36.3% under storm load condition. The research findings can provide references for the design and optimization of relevant CFDST towers.

参考文献/References:

[1] HERNANDEZ-ESTRADA E,LASTRES-DANGUILLECOURT O,ROBLES-OCAMPO J B,et al.Considerations for the structural analysis and design of wind turbine towers:a review[J].Renewable and Sustainable Energy Reviews,2021,137:110447.
[2]ZHAO Y,PAN J N,HUANG Z Y,et al.Analysis of vibration monitoring data of an onshore wind turbine under different operational conditions[J].Engineering Structures,2020,205:110071.
[3]OLIVEIRA G,MAGALHAES F,CUNHA A,et al.Continuous dynamic monitoring of an onshore wind turbine[J].Engineering Structures,2018,164:22-39.
[4]戴靠山,赵 志,毛振西.风力发电塔筒极端动力荷载作用下破坏的对比研究[J].振动与冲击,2019,38(15):252-257,272.
DAI Kaoshan,ZHAO Zhi,MAO Zhenxi.Failure of a wind turbine tower under extreme dynamic loads[J].Journal of Vibration and Shock,2019,38(15):252-257,272.
[5]GUO S X,LI Y L,CHEN W M,et al.Analysis on dynamic interaction between flexible bodies of large-sized wind turbine and its response to random wind loads[J].Renewable Energy,2021,163:123-137.
[6]ZUO H R,BI K M,HAO H,et al.Dynamic analyses of operating offshore wind turbines including soil-structure interaction[J].Engineering Structures,2018,157:42-62.
[7]CHOU J S,OU Y C,LIN K Y,et al.Structural failure simulation of onshore wind turbines impacted by strong winds[J].Engineering Structures,2018,162:257-269.
[8]HARTE R,VAN ZIJL G P A G.Structural stability of concrete wind turbines and solar chimney towers exposed to dynamic wind action[J].Journal of Wind Engineering and Industrial Aerodynamics,2007,95(9/10/11):1079-1096.
[9]DE LANA J A,MAGALHAES JUNIOR P A A,MAGALHAES C A,et al.Behavior study of prestressed concrete wind-turbine tower in circular cross-section[J].Engineering Structures,2021,227:111403.
[10]姚 悦.装配式钢-混凝土混合塔架的承载能力分析和优化[D].南京:南京航空航天大学,2019.
YAO Yue.Analysis on load capacity and optimization of fabricated steel-concrete hybrid tower[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2019.
[11]LI W,REN Q X,HAN L H,et al.Behaviour of tapered concrete-filled double skin steel tubular(CFDST)stub columns[J].Thin-walled Structures,2012,57:37-48.
[12]MA H W,YANG J.A novel hybrid monopile foundation for offshore wind turbines[J].Ocean Engineering,2020,198:106963.
[13]LI W,HAN L H,REN Q X,et al.Behavior and calculation of tapered CFDST columns under eccentric compression[J].Journal of Constructional Steel Research,2013,83:127-136.
[14]WANG W D,FAN J H,SHI Y L,et al.Research on mechanical behaviour of tapered concrete-filled double skin steel tubular members with large hollow ratio subjected to bending[J].Journal of Constructional Steel Research,2021,182:106689.
[15]黄 宏,朱 琪,陈梦成,等.方中空夹层钢管混凝土压弯扭构件试验研究[J].土木工程学报,2016,49(3):91-97.
HUANG Hong,ZHU Qi,CHEN Mengcheng,et al.Experimental study on concrete-filled double-skin square steel tubes under compression-bending-torsion loading conditions[J].China Civil Engineering Journal,2016,49(3):91-97.
[16]史艳莉,张超峰,鲜 威,等.圆锥形中空夹层钢管混凝土偏压构件受力性能研究[J].建筑结构学报,2021,42(5):155-164,176.
SHI Yanli,ZHANG Chaofeng,XIAN Wei,et al.Research on mechanical behavior of tapered concrete-filled double skin steel tubular members under eccentric compression[J].Journal of Building Structures,2021,42(5):155-164,176.
[17]中空夹层钢管混凝土结构技术规程:T/CCES 7-2020[S].北京:中国建筑工业出版社,2020.
Technical specification for concrete-filled double skin steel tubular structures:T/CCES 7-2020[S].Beijing:China Architecture & Building Press,2020.
[18]史艳莉,鲜 威,王 蕊,等.方套圆中空夹层钢管混凝土组合构件横向撞击试验研究[J].土木工程学报,2019,52(12):11-21,35.
SHI Yanli,XIAN Wei,WANG Rui,et al.Experimental study on circular-in-square concrete filled double-skin steel tubular(CFDST)composite components under lateral impact[J].China Civil Engineering Journal,2019,52(12):11-21,35.
[19]HAN L H,HUANG H,TAO Z,et al.Concrete-filled double skin steel tubular(CFDST)beam-columns subjected to cyclic bending[J].Engineering Structures,2006,28(12):1698-1714.
[20]JONKMAN J,BUTTERFIELD S,MUSIAL W,et al.Definition of a 5-MW reference wind turbine for offshore system development[R].Colorado:NREL,2009.
[21]克拉夫R,彭津J.结构动力学[M].2版.王光远,译.北京:高等教育出版社,2006.
CLOUGH R,PENZIEN J.Dynamics of structures[M].2nd ed.Translated by WANG Guangyuan.Beijing:Higher Education Press,2006.
[22]钢结构设计标准:GB 50017—2017[S].北京:中国建筑工业出版社,2017.
Standard for steel structure design:GB 50017—2017[S].Beijing:China Architecture & Building Press,2017.
[23]WOLF J P.Spring-dashpot-mass models for foundation vibrations[J].Earthquake Engineering & Structural Dynamics,1997,26(9):931-949.
[24]王修琼,崔剑峰.Davenport谱中系数K的计算公式及其工程应用[J].同济大学学报(自然科学版),2002,30(7):849-852.
WANG Xiuqiong,CUI Jianfeng.Formula of coefficient K in expression of davenport spectrum and its engineering application[J].Journal of Tongji University,2002,30(7):849-852.
[25]曾庆川,刘 浩,LIM Che Wah,等.基于改进叶素动量理论的水平轴风电机组气动性能计算[J].中国电机工程学报,2011,31(23):129-134.
ZENG Qingchuan,LIU Hao,WAH L C,et al.Computation of aerodynamic performance for horizontal axis wind turbine based on improved blade element momentum theory[J].Proceedings of the CSEE,2011,31(23):129-134.
[26]高耸结构设计标准:GB 50135—2019[S].北京:中国计划出版社,2019.
Standard for design of high-rising structures:GB 50135—2019[S].Beijing:China Planning Press,2019.

相似文献/References:

备注/Memo

备注/Memo:

收稿日期:2021-10-27
基金项目:国家自然科学基金项目(52168021); 甘肃省建设科技项目(JK2021-42)
作者简介:王文达(1976-),男,工学博士,教授,博士生导师,E-mail:wangwd@lut.edu.cn。

常用功能

更新日期/Last Update: 2023-03-20