|本期目录/Table of Contents|

[1]刘永健,张宁,张俊光.PBL加劲型矩形钢管混凝土的力学性能[J].建筑科学与工程学报,2012,29(04):13-17.
 LIU Yong-jian,ZHANG Ning,ZHANG Jun-guang.Mechanical Behavior of Concrete-filled Square Steel Tube Stiffened with PBL[J].Journal of Architecture and Civil Engineering,2012,29(04):13-17.
点击复制

PBL加劲型矩形钢管混凝土的力学性能(PDF)
分享到:

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
29卷
期数:
2012年04期
页码:
13-17
栏目:
出版日期:
2012-12-30

文章信息/Info

Title:
Mechanical Behavior of Concrete-filled Square Steel Tube Stiffened with PBL
作者:
刘永健1,张宁1,2,张俊光1
1. 长安大学 旧桥检测与加固技术交通行业重点实验室,陕西 西安 710064; 2. 中交第一公路勘察设计研究院有限公司,陕西 西安 710075
Author(s):
LIU Yong-jian1, ZHANG Ning1,2, ZHANG Jun-guang1
1. Bridge Detection and Strengthening Key Laboratory of Transportation Industry, Chang'an University, Xi'an 710064, Shaanxi, China; 2. CCCC First Highway Consultants Co., Ltd, Xi'an 710075, Shaanxi, China
关键词:
矩形钢管混凝土 PBL剪力键 粘结强度 承载力 传力机理
Keywords:
concrete-filled square steel tube PBL shear connector bond strength bearing capacity load transmission mechanism
分类号:
TU375.1
DOI:
-
文献标志码:
A
摘要:
为改善钢管混凝土界面和节点力学性能,加强钢管与混凝土的组合效应,提出在钢管混凝土的钢管内设置开孔钢板纵肋,使其具有PBL连接件和加劲肋的双重作用; 进行了无肋和设置PBL加劲肋2种截面形式的矩形钢管混凝土轴压短柱试验; 分析了无肋和设置PBL加劲肋时,结构中节点剪力在钢管混凝土钢-混界面的传递模式。结果表明:与无肋试件相比,设置PBL加劲肋使得矩形钢管对混凝土的套箍作用得到加强,其轴压承载力提高了14%~28%,试件延性明显改善; PBL连接件能够有效缩短管壁剪力向核心混凝土的传递线路,改善节点区域的应力分布。PBL加劲型矩形钢管混凝土具有承载力高、钢-混组合效应明显的优势,并且构造简单、施工方便,对丰富和发展钢管混凝土在桥梁工程中的应用具有重要意义。
Abstract:
To improve the interface behavior between the tube and concrete column, a new type of concrete-filled steel tube inside placed by a longitudinal stiffener with PBL holes was proposed. It provided functions of both stiffness enhance and internal shear connection to the concrete-filled steel tube. An axial compression test was employed to investigate the improvement of bearing capacity of concrete-filled square steel tube stiffened with PBL shear connector. The shear bond between steel and concrete was analyzed for the concrete-filled tubes with and without PBL stiffener. The results show that the bearing capacity is enhanced by 14% to 28% compared to that without PBL stiffener, and its ductility is also improved. The transfer distance of shear force from steel tube to concrete column is decreased dramatically with the aid of PBL stiffener. As a result, the PBL stiffener, welded on the tube surface inside, can effectively improve the mechanical property of concrete-filled steel tube, thus can provide a new enhancement measure for bridge construction.

参考文献/References:

[1] 钟善桐.钢管混凝土结构[M].北京:清华大学出版社,2003. ZHONG Shan-tong.Structure of Concrete-filled Steel Tube[M].Beijing:Tsinghua University Press,2003.
[2]陈宝春.钢管混凝土拱桥[M].北京:人民交通出版社,2007. CHEN Bao-chun.Concrete Filled Steel Tubular Arch Bridges[M].Beijing:China Communications Press,2007.
[3]林春皎,郑皆连,秦 荣.钢管混凝土拱肋混凝土脱空研究综述[J].中外公路,2004,24(6):54-58. LIN Chun-jiao,ZHENG Jie-lian,QIN Rong.Reviews on the Detachment of Concrete Column from Steel Tube in Concrete-filled Steel Tubular Arch Bridge[J].Journal of China & Foreign Highway,2004,24(6):54-58.
[4]徐亚光,颜东煌,邵旭东.脱粘对桁架式钢管混凝土拱桥受力性能的影响[J].中国公路学报,2007,20(6):61-66. XU Ya-guang,YAN Dong-huang,SHAO Xu-dong.Influences of Debonding on Mechanical Behavior of Trussed Concrete-filled Steel Tubular Arch Bridge[J].China Journal of Highway and Transport,2007,20(6):61-66.
[5]刘永健,刘君平,池建军.钢管混凝土界面抗剪粘结滑移力学性能试验[J].广西大学学报:自然科学版,2010,35(1):17-23. LIU Yong-jian,LIU Jun-ping,CHI Jian-jun.Shear Bond Behaviors at Interface of Concrete-filled Steel Tube[J].Journal of Guangxi University:Nature Science Edition,2010,35(1):17-23.
[6]张清华,李 乔,唐 亮.桥塔钢-混凝土结合段剪力键破坏机理及极限承载力[J].中国公路学报,2007,20(1):85-90. ZHANG Qing-hua,LI Qiao,TANG Liang.Fracture Mechanism and Ultimate Carrying Capacity of Shear Connectors Applied for Steel-concrete Joint Segment of Bridge Pylon[J].China Journal of Highway and Transport,2007,20(1):85-90.
[7]张清华,李 乔,唐 亮.剪力连接件的三维非线性仿真分析方法[J].西南交通大学学报,2005,40(5):595-599. ZHANG Qing-hua,LI Qiao,TANG Liang.Research on 3D FEM Nonlinear Simulation Method for Shear Connectors[J].Journal of Southwest Jiaotong University,2005,40(5):595-599.
[8]胡建华,侯文崎,叶梅新.PBL剪力键承载力影响因素和计算公式研究[J].铁道科学与工程学报,2007,4(6):12-18. HU Jian-hua,HOU Wen-qi,YE Mei-xin.Study of Influence Factors and Formula for the Bearing Capacity of PBL Shear Connectors[J].Journal of Railway Science and Engineering,2007,4(6):12-18.
[9]LEONHARDT E F,ANDRAE W,ANDRAE H P,et al.Novel,Advantageous Shear Connectors for Composite Steel Structures with High Fatigue Strength[J].Concrete and Reinforced Concrete Construction,1987,82(12):325-331.

相似文献/References:

[1]程 高,刘永健,邱洁霖,等.PBL加劲型矩形钢管混凝土不等宽T型节点应力集中系数分析[J].建筑科学与工程学报,2014,31(04):74.
 CHENG Gao,LIU Yong-jian,QIU Jie-lin,et al.Analysis of Stress Concentration Factor on Concrete-filled Rectangular Steel Tube T-joints Stiffened with PBL[J].Journal of Architecture and Civil Engineering,2014,31(04):74.
[2]刘永健,李 慧,张 宁.非均匀受压矩形钢管混凝土局部弹性屈曲分析[J].建筑科学与工程学报,2015,32(04):1.
 LIU Yong-jian,LI Hui,ZHANG Ning.Local Elastic Buckling Analysis of Rectangular Concrete-filled Steel Tube Under Non-uniform Compression[J].Journal of Architecture and Civil Engineering,2015,32(04):1.
[3]刘永健,李 慧,张 宁,等.PBL加劲型矩形钢管混凝土界面粘结-滑移性能[J].建筑科学与工程学报,2015,32(05):1.
 LIU Yong-jian,LI Hui,ZHANG Ning,et al.Interface Bond-slip Performance of Rectangular Concrete-filled Steel Tube Stiffened by PBL[J].Journal of Architecture and Civil Engineering,2015,32(04):1.
[4]刘永健,李 慧,张 宁.界面状态对矩形钢管混凝土构件抗弯性能的影响[J].建筑科学与工程学报,2016,33(01):15.
 LIU Yong-jian,LI Hui,ZHANG Ning.Influence of Interface State of Rectangular Concrete-filled Steel Tube on Flexural Performance of Component[J].Journal of Architecture and Civil Engineering,2016,33(04):15.
[5]张 宁,刘永健,李 慧.PBL加劲型矩形钢管混凝土轴压柱局部屈曲性能分析[J].建筑科学与工程学报,2017,34(02):95.
 ZHANG Ning,LIU Yong-jian,LI Hui.Local Buckling Performance Analysis of Rectangular Concrete-filled Steel Tubular Axial Compression Column with PBL Stiffeners[J].Journal of Architecture and Civil Engineering,2017,34(04):95.
[6]刘永健,周绪红,刘君平.矩形钢管混凝土K型节点受力性能试验[J].建筑科学与工程学报,2007,24(02):36.
 LIU Yong-jian,ZHOU Xu-hong,LIU Jun-ping.Experiment on Force Performance of Concrete-filled Rectangular Steel Tube K-joints[J].Journal of Architecture and Civil Engineering,2007,24(04):36.
[7]田智娟,刘永健,马印平,等.严寒地区矩形钢管混凝土截面温度分布试验[J].建筑科学与工程学报,2018,35(05):170.
 TIAN Zhi-juan,LIU Yong-jian,MA Yin-ping,et al.Experiment on Temperature Distribution of Rectangular CFST Cross Section in Severe Cold Areas[J].Journal of Architecture and Civil Engineering,2018,35(04):170.
[8]王海涛,刘永健,孙立鹏.基于壁板屈曲后强度的矩形钢管混凝土偏压承载力计算方法[J].建筑科学与工程学报,2022,39(05):41.[doi:10.19815/j.jace.2022.06027]
 WANG Hai-tao,LIU Yong-jian,SUN Li-peng.Calculation Method of Eccentric Bearing Capacity of RCFST Based on Post-buckling Strength of Panels[J].Journal of Architecture and Civil Engineering,2022,39(04):41.[doi:10.19815/j.jace.2022.06027]
[9]袁涛涛,蔡玉军,聂少锋,等.带PBL剪力键的钢芯板混凝土组合剪力墙低周往复加载试验研究[J].建筑科学与工程学报,2024,41(05):42.[doi:10.19815/j.jace.2022.10117]
 YUAN Taotao,CAI Yujun,NIE Shaofeng,et al.Low cyclic loading tests on steel core plate and concrete composite shear walls with PBL shear connectors[J].Journal of Architecture and Civil Engineering,2024,41(04):42.[doi:10.19815/j.jace.2022.10117]

备注/Memo

备注/Memo:
收稿日期:2012-11-15
基金项目:国家自然科学基金项目(51178051)
作者简介:刘永健(1966-),男,江西婺源人,教授,博士研究生导师,工学博士,E-mail:steellyj@126.com。
更新日期/Last Update: 2012-12-20