|本期目录/Table of Contents|

[1]郁有升,梅 灿,雷 鸣.内嵌CCA板填充墙对钢框架结构受力性能的影响[J].建筑科学与工程学报,2018,35(03):63-70.
 YU You-sheng,MEI Can,LEI Ming.Influence of CCA Plate Infill Wall on Mechanical Behavior of Steel Frame Structures[J].Journal of Architecture and Civil Engineering,2018,35(03):63-70.
点击复制

内嵌CCA板填充墙对钢框架结构受力性能的影响(PDF)
分享到:

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
35卷
期数:
2018年03期
页码:
63-70
栏目:
出版日期:
2018-05-30

文章信息/Info

Title:
Influence of CCA Plate Infill Wall on Mechanical Behavior of Steel Frame Structures
作者:
郁有升梅 灿雷 鸣
青岛理工大学土木工程学院
Author(s):
YU You-sheng, MEI Can, LEI Ming
School of Civil Engineering, Qingdao University of Technology
关键词:
CCA板填充墙钢框架受力性能低周往复加载试验
Keywords:
CCA plate infill wall steel frame mechanical behavior low frequency cyclic loading test
分类号:
-
DOI:
-
文献标志码:
A
摘要:
为了研究蒸压无石棉纤维素纤维水泥板(CCA板)填充墙对钢框架结构受力性能的影响,对纯框架和带CCA板填充墙钢框架进行了低周往复加载试验,并利用有限元软件ABAQUS进行了模拟分析。根据试验及有限元模拟结果对带CCA板填充墙钢框架的承载能力、抗侧刚度和耗能能力等抗震性能指标进行了分析。结果表明:在低周往复荷载作用下,CCA板填充墙提高了钢框架结构的承载能力、抗侧刚度;CCA板填充墙参与了钢框架结构的滞回耗能,带CCA板填充墙钢框架的累积耗能能力明显优于纯框架;与纯框架相比,带CCA板填充墙钢框架的初始刚度有所提高;当位移角达到某一限值时,CCA板填充墙的损坏会引起钢框架结构的刚度发生突变,钢框架结构非弹性设计不应考虑CCA板填充墙对钢框架结构刚度的提高作用;所得结论可为带CCA板填充墙钢框架的工程应用提供参考。
Abstract:
In order to study the influence of cellulose fiber cement autoclaved plate (CCA plate) infill wall on the mechanical behavior of steel frame structures, the low frequency cyclic loading tests of steel frame and steel frame infilled with CCA plate were done. The steel frame and steel frame infilled with CCA plate were simulated by the finite element software ABAQUS. The bearing capacity, stiffness, energy dissipation capacity and seismic performance index of steel frame infilled with CCA plate were analyzed according to the results of test and finite element simulation. The results show that CCA plate infill wall will enhance the bearing capacity, lateral stiffness of steel frame. The CCA plate infill wall is involved in hysteretic energy dissipation of steel frame structure. The energy dissipation capacity of steel frame infilled with CCA plate is significantly better than that of the steel frame. Compared with steel frame, the peak load and initial stiffness of steel frame infilled with CCA plate are improved. When the drift angle reaches a certain limit, the stiffness of steel frame structure will suddenly change due to the damage of CCA plate infill wall, therefore the influence of CCA plate infill wall on the stiffness of steel frame structure shouldn’t be considered in the structural inelastic design. The results can promote the application of steel frame infilled with CCA plates.

参考文献/References:

相似文献/References:

[1]郑宏,潘天久,卫磊.深梁填充钢框架的发展与研究进展 [J].建筑科学与工程学报,2013,30(04):32.
 ZHENG Hong,PAN Tian-jiu,WEI Lei.Development and Research Progress of Steel Frame Infilled with Deep Beam[J].Journal of Architecture and Civil Engineering,2013,30(03):32.
[2]周天华,吴函恒,白亮,等.钢框架-预制混凝土抗侧力墙装配式结构体系[J].建筑科学与工程学报,2013,30(03):1.
 ZHOU Tian-hua,WU Han-heng,BAI Liang,et al.Fabricated Structural System of Steel Frame-prefabricated Concrete Lateral Resistance Wall[J].Journal of Architecture and Civil Engineering,2013,30(03):1.
[3]徐忠根,梁广贤,邓长根.定位轴线存在偏差的外传力钢框架节点传力板参数分析[J].建筑科学与工程学报,2015,32(02):42.
 XU Zhong-gen,LIANG Guang-xian,DENG Chang-gen.Parameter Analysis of Force-transforming Plates in Outside Steel Frame Joints with Location Axis Deviations[J].Journal of Architecture and Civil Engineering,2015,32(03):42.
[4]卢林枫,刘子龙,李成成,等.节点域箱形加强式工字形柱弱轴连接钢框架的力学性能和经济性分析[J].建筑科学与工程学报,2015,32(03):52.
 LU Lin-feng,LIU Zi-long,LI Cheng-cheng,et al.Steel Frame Mechanical Properties and Economical Efficiency Analysis of Box Strengthenjoint Region Connection of I-section Column for Weak Axis[J].Journal of Architecture and Civil Engineering,2015,32(03):52.
[5]吴函恒,秦沛远,陈军武,等.水平荷载作用下钢框架预制混凝土抗侧力墙体装配式结构的简化计算方法[J].建筑科学与工程学报,2016,33(03):86.
 WU Han-heng,QIN Pei-yuan,CHEN Jun-wu,et al.Simplified Calculation Method of Steel Frame-prefabricated Concrete Lateral Force Resisting Wall Structures Under Lateral Load[J].Journal of Architecture and Civil Engineering,2016,33(03):86.
[6]苟海刚,郑辉晓,卢林枫.箱形节点域工字形柱弱轴盖板加强连接的设计方法[J].建筑科学与工程学报,2018,35(01):77.
 GOU Hai-gang,ZHENG Hui-xiao,LU Lin-feng.Design Method of Cover-plate Reinforced Connection of I-section Column for Weak Axis with Box Joint Region[J].Journal of Architecture and Civil Engineering,2018,35(03):77.
[7]韩明岚,王 帅,牟 政,等.延性节点钢框架结构的抗震性能分析[J].建筑科学与工程学报,2018,35(04):72.
 HAN Ming-lan,WANG Shuai,MOU Zheng,et al.Seismic Performance Analysis of Steel Frame Structure with Ductile Connections[J].Journal of Architecture and Civil Engineering,2018,35(03):72.
[8]郑 宏,方贤禄,苏耀烜,等.局部可更换钢框架梁-柱节点受力性能研究[J].建筑科学与工程学报,2021,38(02):47.[doi:10.19815/j.jace.2020.07030]
 ZHENG Hong,FANG Xian-lu,SU Yao-xuan,et al.Study on Mechanical Behavior of Partially Replaceable Steel Frame Beam-column Joints[J].Journal of Architecture and Civil Engineering,2021,38(03):47.[doi:10.19815/j.jace.2020.07030]

备注/Memo

备注/Memo:
更新日期/Last Update: 2018-05-31