|本期目录/Table of Contents|

[1]高婷婷,周绪红,刘永健,等.采用GB 50018—2002计算壁厚小于2 mm的受弯构件承载力的适用性分析[J].建筑科学与工程学报,2013,30(04):91-97.
　GAO Ting-ting,ZHOU Xu-hong,LIU Yong-jian,et al.Applicability Analysis of Bear Capacity of Flexural Members with Thickness Less than 2 mm Calculated Using GB 50018—2002[J].Journal of Architecture and Civil Engineering,2013,30(04):91-97.
点击复制

采用GB 50018—2002计算壁厚小于2 mm的受弯构件承载力的适用性分析(PDF)
分享到：

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
30卷
期数:
2013年04期
页码:
91-97
栏目:
出版日期:
2013-12-30

文章信息/Info

Title:
Applicability Analysis of Bear Capacity of Flexural Members with Thickness Less than 2 mm Calculated Using GB 50018—2002
作者:
高婷婷，周绪红，刘永健，石宇
长安大学 建筑工程学院
Author(s):
GAO Ting-ting, ZHOU Xu-hong, LIU Yong-jian, SHI Yu
School of Civil Engineering, Chang’an University
关键词:
冷弯薄壁型钢; 受弯构件; 承载力; 规范; 壁厚
Keywords:
cold-formed thin-wall steel;  flexural member;  bear capacity;  code;  thickness
分类号:
-
DOI:
-
文献标志码:
A
摘要:
对各国已有的壁厚小于2 mm的冷弯薄壁型钢梁受弯性能试验中的86根槽形、40根Z形、6根帽形和6根工字形冷弯薄壁型钢梁的试验资料进行总结。采用中国《冷弯薄壁型钢结构技术规范》（GB 50018—2002）第5.3节中受弯构件的相关规定计算各构件的极限弯矩，将计算结果与试验结果进行比较。结果表明：按中国规范GB 50018—2002规定计算壁厚小于2 mm的冷弯薄壁型钢受弯构件承载力是可行的，试验值均大于规范理论计算值，规范理论计算值偏于安全。
Abstract:
The experiments at home and abroad about bending behaviour of coldformed thinwall steel beams with thickness less than 2 mm were summarized, including eighty-six channel-section specimens, forty Z-section specimens, six hat-section specimens and six I-section specimens. The specimens’ bending capacity was calculated by the provisions of chapter 5.3 in Chinese Current Technical Code of Cold-formed Thin-wall Steel Structures (GB 50018—2002), and the calculation results were compared with the test results. The results show that the process of calculating bearing capacity according to Chinese Code GB 50018—2002 is feasible, and the test results are higher than code calculation values, which means the using of calculation formula set in the norm is reasonable.

参考文献/References:

-

相似文献/References:

[1]石 宇,王身伟,刘永健.冷弯薄壁型钢单颗自攻螺钉抗剪连接性能研究[J].建筑科学与工程学报,2014,31(02):57.
[2]刘 喜,王 征,吴 涛.FRP筋混凝土梁挠度与裂缝宽度计算模型分析[J].建筑科学与工程学报,2017,34(05):163.
　LIU Xi,WANG Zheng,WU Tao.Calculation Model of Deflection and Crack Width of Concrete Beam Reinforced with FRP Bars[J].Journal of Architecture and Civil Engineering,2017,34(04):163.
[3]周朝阳,黄林,贺学军.粘贴预应力碳纤维布钢梁的放张效应[J].建筑科学与工程学报,2010,27(04):14.
　ZHOU Chao-yang,HUANG Lin,HE Xue-jun.Effect of Releasing Pretension for Steel Beams Bonded with Prestressed Carbon Fiber Sheet[J].Journal of Architecture and Civil Engineering,2010,27(04):14.
[4]石宇,周绪红,刘永健.冷弯薄壁卷边槽钢偏心受压构件承载力计算的折减强度法[J].建筑科学与工程学报,2011,28(03):40.
　SHI Yu,ZHOU Xu-hong,LIU Yong-jian.Strength-reduction Method for Load-carrying Capacity of Cold-formed Thin-walled Lipped Channel Members Under Eccentric Compression[J].Journal of Architecture and Civil Engineering,2011,28(04):40.
[5]刘向斌,周天华,聂少锋,等.冷弯薄壁型钢开口三肢拼合立柱轴压性能有限元分析[J].建筑科学与工程学报,2011,28(03):119.
　LIU Xiang-bin,ZHOU Tian-hua,NIE Shao-feng,et al.Finite Element Analysis of Cold-formed Thin-walled Steel Three Open Limbs Built-up Columns Under Axial Compression[J].Journal of Architecture and Civil Engineering,2011,28(04):119.
[6]聂少锋,周天华,熊智刚,等.冷弯薄壁型钢开洞组合墙体抗剪性能研究[J].建筑科学与工程学报,2012,29(01):101.
　NIE Shao-feng,ZHOU Tian-hua,XIONG Zhi-gang,et al.Research on Shear Resistance Behavior of Cold-formed Thin-walled Steel Composite Walls with Opening[J].Journal of Architecture and Civil Engineering,2012,29(04):101.
[7]刘向斌,周天华,何鑫,等.冷弯薄壁型钢住宅结构整体扭转效应分析[J].建筑科学与工程学报,2012,29(02):83.
　LIU Xiang-bin,ZHOU Tian-hua,HE Xin,et al.Analysis of Torsional Effect of Cold-formed Thin-walled Steel Residence Structure[J].Journal of Architecture and Civil Engineering,2012,29(04):83.
[8]周绪红,李喆,刘永健,等.冷弯薄壁型钢拼合截面柱轴压承载力计算[J].建筑科学与工程学报,2012,29(04):1.
　ZHOU Xu-hong,LI Zhe,LIU Yong-jian,et al.Calculation Method for Bearing Capacity of Cold-formed Steel Built-up Columns Under Axial Compression[J].Journal of Architecture and Civil Engineering,2012,29(04):1.
[9]刘晶波,陈鸣,刘祥庆,等.低层冷弯薄壁型钢结构住宅整体性能分析[J].建筑科学与工程学报,2008,25(04):6.
　LIU Jing-bo,CHEN Ming,LIU Xiang-qing,et al.Integral Behavior Analysis of Cold-formed Thin-walled Steel Framing System of Low-rise Residential Buildings[J].Journal of Architecture and Civil Engineering,2008,25(04):6.
[10]周绪红,李艳敏,石宇,等.竖向荷载作用下冷弯薄壁型钢墙架柱的承载力[J].建筑科学与工程学报,2006,23(03):7.
　ZHOU Xu-hong,LI Yan-min,SHI Yu,et al.Bearing Capacity of Cold-Formed Thin-WalledSteel Wall Stud Under Vertical Load[J].Journal of Architecture and Civil Engineering,2006,23(04):7.

备注/Memo

备注/Memo:
-
更新日期/Last Update: 2014-01-02