|本期目录/Table of Contents|

[1]刘荣桂,平 舒,谢桂华,等.碳粉/二氧化硅对碳纤维增强复合材料温阻效应影响[J].建筑科学与工程学报,2017,34(06):36-43.
 LIU Rong-gui,PING Shu,XIE Gui-hua,et al.Influence of Carbon Powder/Silica on Thermo-resistive Effect of Carbon Fiber Reinforced Polymer[J].Journal of Architecture and Civil Engineering,2017,34(06):36-43.
点击复制

碳粉/二氧化硅对碳纤维增强复合材料温阻效应影响(PDF)
分享到:

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
34卷
期数:
2017年06期
页码:
36-43
栏目:
出版日期:
2017-11-30

文章信息/Info

Title:
Influence of Carbon Powder/Silica on Thermo-resistive Effect of Carbon Fiber Reinforced Polymer
作者:
刘荣桂平 舒谢桂华刘 聃席宜超
江苏大学土木工程与力学学院
Author(s):
LIU Rong-gui, PING Shu, XIE Gui-hua, LIU Dan, XI Yi-chao
Faculty of Civil Engineering and Mechanics, Jiangsu University
关键词:
碳纤维增强复合材料温阻效应PTC强度碳粉二氧化硅传感元件
Keywords:
CFRP thermoresistive effect PTC intensity carbon powder silica sensor element
分类号:
-
DOI:
-
文献标志码:
A
摘要:
分别对有无掺入碳粉和二氧化硅混合颗粒的碳纤维增强复合材料(CFRP)传感元件进行了室温至高温(100 ℃)时的温阻效应研究。结果表明:一次升温过程中2种CFRP传感元件为正温度系数(PTC)效应,温度差值与电阻的常用对数值线性关系较好,在基体中添加一定量碳粉和二氧化硅的混合填料可以改善传感元件的温度敏感特性;第1次温度循环结束后CFRP传感元件内部产生不会随时间消失的滞留电阻;重复温度过程中,相对于无添加型CFRP传感元件,掺入碳粉和二氧化硅混合物使传感元件PTC强度较高,规律性和重复性较好,温度差值在0~20 ℃时传感元件表现为负温度系数(NTC)效应,20~80 ℃时为PTC效应。
Abstract:
The thermo-resistive effect of CFRP sensor elements with mixed carbon powder and silica at room temperature to high temperature (100 ℃) was studied. The results show that the two CFRP sensor elements have positive temperature coefficient (PTC) effect when heating, and have good liner relationship between temperature difference (ΔT) and the common logarithm of resistance. Adding carbon powder and silica can improve the temperature sensitive characteristics of the sensor element. After the first temperature cycle, the CFRP sensor element generates a retention resistance which does not disappear with time. In the process of repeating the temperature, with respect to the CFRP sensor elements without any mixture, the CFRP sensor element added carbon powder and silica has higher PTC strength and better regularity and repeatability, and it shows negative temperature coefficient (NTC) effect when ΔT at 0-20 ℃, PTC effect at 20-80 ℃.

参考文献/References:

相似文献/References:

[1]谢建和,黄昆泓,李自坚,等.BFRP和CFRP加固受弯混凝土界面疲劳性能试验[J].建筑科学与工程学报,2015,32(04):53.
 XIE Jian-he,HUANG Kun-hong,LI Zi-jian,et al.Experiment on Fatigue Behaviors of Flexural Concrete Interface Strengthened with BFRP and CFRP[J].Journal of Architecture and Civil Engineering,2015,32(06):53.
[2]赵均海,杜文超,张常光.CFRP-方钢管混凝土轴压短柱承载力分析[J].建筑科学与工程学报,2015,32(06):30.
 ZHAO Jun-hai,DU Wen-chao,ZHANG Chang-guang.Analysis of Load Carrying Capacity of Concrete-filled Square CFRP-steel Tubular Stub Column Under Axial Compression[J].Journal of Architecture and Civil Engineering,2015,32(06):30.
[3]林 峰,黎艳翔,董 羽.CFRP加固钢筋混凝土直剪承载力试验[J].建筑科学与工程学报,2015,32(06):43.
 LIN Feng,LI Yan-xiang,DONG Yu.Experiment on Shear Transfer Capacity of Reinforced Concrete Strengthened with CFRP[J].Journal of Architecture and Civil Engineering,2015,32(06):43.
[4]高小育,段 海,杨正朴,等.CFRP加固圆形钢管抗压承载力研究[J].建筑科学与工程学报,2020,37(06):55.
 GAO Xiao-yu,DUAN Hai,YANG Zheng-pu,et al.Research on Compressive Carrying Capacity of Circular Steel Tubes Strengthened with Carbon Fiber Reinforced Polymer[J].Journal of Architecture and Civil Engineering,2020,37(06):55.

备注/Memo

备注/Memo:
更新日期/Last Update: 2017-11-30