|本期目录/Table of Contents|

[1]高小育,段 海,杨正朴,等.CFRP加固圆形钢管抗压承载力研究[J].建筑科学与工程学报,2020,37(06):55-63.
 GAO Xiao-yu,DUAN Hai,YANG Zheng-pu,et al.Research on Compressive Carrying Capacity of Circular Steel Tubes Strengthened with Carbon Fiber Reinforced Polymer[J].Journal of Architecture and Civil Engineering,2020,37(06):55-63.
点击复制

CFRP加固圆形钢管抗压承载力研究(PDF)
分享到:

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
37卷
期数:
2020年06期
页码:
55-63
栏目:
出版日期:
2020-11-30

文章信息/Info

Title:
Research on Compressive Carrying Capacity of Circular Steel Tubes Strengthened with Carbon Fiber Reinforced Polymer
文章编号:
1673-2049(2020)06-0055-09
作者:
高小育段 海杨正朴李兆阳刘永健
长安大学 公路学院,陕西 西安 710064
Author(s):
GAO Xiao-yu DUAN Hai YANG Zheng-pu LI Zhao-yang LIU Yong-jian
School of Highway, Chang'an University, Xi'an 710064, Shaanxi, China
关键词:
碳纤维增强复合材料 轴心受压 纤维模型法 抗压承载力
Keywords:
CFRP axial compression fiber model method compressive carrying capacity
分类号:
TU392.3
DOI:
-
文献标志码:
A
摘要:
以碳纤维增强复合材料(CFRP)加固长圆形钢管轴心受压试验结果为基础,分析了CFRP在加载过程中的力学行为并提出了CFRP的破坏与加固机理。考虑初偏心、材料和几何非线性的影响,建立了一个预测承载力、轴向和横向位移的纤维模型,分析了CFRP的有效抗压弹性模量与CFRP层数的变化关系。将有效抗压弹性模量应用于有限元模型中进行加载试验模拟,验证简化纤维模型的合理性。结果表明:在达到极限承载力之前,圆形钢管轴心受压构件中部全截面均表现为压应变,验证了提出的加固机理; 随着CFRP层数的增加,CFRP的有效抗压弹性模量按自然对数增长; 有效抗压弹性模量的引入较好地模拟了CFRP加固钢管的受压机理,并且纤维模型计算结果与有限元模型计算结果吻合良好; 随着加载偏心距增大,CFRP对长轴压构件承载力的贡献率逐渐降低,因此对于此类加固构件的使用应该尽量减小加载偏心距,以充分利用CFRP的抗压强度。
Abstract:
Based on the test results of axial compression of long circular steel tube strengthened with carbon fiber reinforced polymer(CFRP), the mechanical behavior of CFRP in the loading process was analyzed, and the failure and reinforcement mechanism of CFRP were proposed. Considering the effects of initial eccentricity, material and geometric nonlinearity, a fiber model was established to predict the bearing capacity, axial and lateral displacements of CFRP. The relationship between the effective compressive elastic modulus of CFRP and the number of CFRP layers was analyzed. The effective compressive elastic modulus was applied to the finite element model to simulate the loading test, and the rationality of the simplified fiber model was verified. The results show that before the ultimate bearing capacity is reached, the central section of the circular steel tube axial compression member shows compressive strain, which verifies the proposed reinforcement mechanism. With the increase of CFRP layers, the effective compressive elastic modulus of CFRP increases according to natural logarithm. The introduction of effective compressive elastic modulus well simulates the compression mechanism of CFRP strengthened steel pipe, and the calculation results of fiber model are in good agreement with those of finite element model.With the increase of loading eccentricity, the contribution rate of CFRP to the bearing capacity of long axial compression members gradually decreases. Therefore, the loading eccentricity should be reduced as much as possible to make full use of the compressive strength of CFRP.

参考文献/References:

[1] 程江敏,程 波,邱 鹤,等.钢结构加固方法研究进展[J].钢结构,2012,27(11):1-7. CHENG Jiang-min,CHENG Bo,QIU He,et al.Research Development of Steel Structure Reinforcement[J].Steel Construction,2012,27(11):1-7.
[2]季园园,韩庆华,芦 燕,等.CFRP在土木工程中的应用研究[J].结构工程师,2014,30(5):210-219. JI Yuan-yuan,HAN Qing-hua,LU Yan,et al.Application Research of CFRP in Civil Engineering[J].Structural Engineers,2014,30(5):210-219.
[3]卢亦焱,黄银燊,张号军,等.FRP加固技术研究新进展[J].中国铁道科学,2006,27(3):34-42. LU Yi-yan,HUANG Yin-shen,ZHANG Hao-jun,et al.New Progress in the Study of the Technology of Reinforcement with Fiber Reinforced Plastics[J].China Railway Science,2006,27(3):34-42.
[4]HMIDAN A,KIM Y.CFRP Repair of Steel Beams with Various Initial Crack Configurations[J].Journal of Composites for Construction,2011,15(6):952-962.
[5]SAYED-AHMED E Y.Numerical Investigation into Strengthening Steel I-section Beams Using CFRP Strips[C]//CROSS B,FINKE J.Structures Congress 2006:Structural Engineering and Public Safety.St.Louis:ASCE,2006:1-8.
[6]ALEMDAR F,GANGEL R,MATAMOROS A.Use of CFRP Overlays to Repair Fatigue Damage in Steel Plates Under Tension Loading[J].Journal of Composites for Construction,2014,18(4):04013052.
[7]ALEMDAR F,MATAMOROS A,BENNETT C R,et al.Improved Method for Bonding CFRP Overlays to Steel for Fatigue Repair[C]//AMES D,DROESS-LER T L,HOIT M.Structures Congress 2011.Las Vegas:ASCE,2011:133-144.
[8]HAEDIR J,ZHAO X.Design of Short CFRP-reinforced Steel Tubular Columns[J].Journal of Constructional Steel Research,2011,67(3):497-509.
[9]KABIR M Z,NAZARI A.Enhancing Ultimate Compressive Strength of Notch Embedded Steel Cylinders Using Overwrap CFRP Patch[J].Applied Composite Materials,2012,19(3/4):723-738.
[10]YU T,FERNANDO A,TENG J G,et al.Experimental Study on CFRP-to-steel Bonded Interfaces[J].Composites Part B:Engineering,2012,43(5):2279-2289.
[11]FERNANDO D,YU T,TENG J G.Behavior of CFRP Laminates Bonded to a Steel Substrate Using a Ductile Adhesive[J].Journal of Composites for Construction,2014,18(2):04013040.
[12]SHAAT A,FAM A.Axial Loading Tests on Short and Long Hollow Structural Steel Columns Retrofitted Using Carbon Fibre Reinforced Polymers[J].Canadian Journal of Civil Engineering,2006,33(4):458-470.
[13]GAO X Y,BALENDRA T,KOH C G.Buckling Strength of Slender Circular Tubular Steel Braces Strengthened by CFRP[J].Engineering Structures,2013,46:547-556.
[14]李兆阳.碳纤维增强复合材料(CFRP)加固钢管柱力学性能数值分析[D].西安:长安大学,2016. LI Zhao-yang.Numerical Analysis of Mechanical Properties of Steel Tube Strengthened by Carbon Fiber Reinforced Polymer[D].Xi'an:Chang'an Unversity,2016.
[15]唐红元,王灿军,潘 毅,等.CFRP加固冷弯薄壁槽钢短柱偏心受压承载力试验研究[J].建筑结构学报,2017,38(11):159-165. TANG Hong-yuan,WANG Can-jun,PAN Yi,et al.Experimental Study on Stability Capacity of Cold-formed Thin-wall Short Steel Channel Columns Reinforced with CFRP Under Eccentric Compression[J].Journal of Building Structures,2017,38(11):159-165.
[16]陈亚飞.CFRP加固偏心受压方钢管柱稳定承载力试验研究[D].合肥:合肥工业大学,2017. CHEN Ya-fei.Experimental Study on Stability Capacity of Square Hollow Section Columns Strengthened with CFRP Under Eccentric Compression[D].Hefei:Hefei University of Technology,2017.
[17]王海涛.CFRP板加固钢结构疲劳性能及其设计方法研究[D].南京:东南大学,2016. WANG Hai-tao.Study on the Fatigue Behavior of CFRP Plate Strengthened Steel Structures and Its Design Method[D].Nanjing:Southeast University,2016.
[18]SHAAT A,FAM A.Fiber-element Model for Slender HSS Columns Retrofitted with Bonded High-modulus Composites[J].Journal of Structural Engineering,2007,133(1):85-95.
[19]彭福明,郝际平,岳清瑞,等.FRP加固钢结构轴心受压构件的弹性稳定分析[J].钢结构,2005,20(3):18-21. PENG Fu-ming,HAO Ji-ping,YUE Qing-rui,et al.Elastic Stability Analysis of Axially Loaded Compression Steel Members by FRP Strengthening[J].Steel Construction,2005,20(3):18-21.
[20]魏劭杰,冯 鹏,杨家琦,等.复合材料套管加固钢柱的压弯性能[J].复合材料科学与工程,2020(9):48-60. WEI Shao-jie,FENG Peng,LIU Jia-qi,et al.Behavior of FRP Tube Strengthened Steel Members Under Eccentric Compressive Load[J].Composites Science and Engineering,2020(9):48-60.
[21]WEST T D.Enhancement to the Bond Between Advanced Composite Materials and Steel for Bridge Rehabilitation[R].Newark:University of Delaware,2001.
[22]周 雷,顾轶卓,邱学仕,等.碳纤维复丝压缩性能测试方法[J].复合材料学报,2015,32(5):1436-1444. ZHOU Lei,GU Yi-zhuo,QIU Xue-shi,et al.Measuring Method for Compression Property of Carbon Fiber Multifilament[J].Acta Materiae Compositae Sinica,2015,32(5):1436-1444.

相似文献/References:

[1]谢建和,黄昆泓,李自坚,等.BFRP和CFRP加固受弯混凝土界面疲劳性能试验[J].建筑科学与工程学报,2015,32(04):53.
 XIE Jian-he,HUANG Kun-hong,LI Zi-jian,et al.Experiment on Fatigue Behaviors of Flexural Concrete Interface Strengthened with BFRP and CFRP[J].Journal of Architecture and Civil Engineering,2015,32(06):53.
[2]赵均海,杜文超,张常光.CFRP-方钢管混凝土轴压短柱承载力分析[J].建筑科学与工程学报,2015,32(06):30.
 ZHAO Jun-hai,DU Wen-chao,ZHANG Chang-guang.Analysis of Load Carrying Capacity of Concrete-filled Square CFRP-steel Tubular Stub Column Under Axial Compression[J].Journal of Architecture and Civil Engineering,2015,32(06):30.
[3]林 峰,黎艳翔,董 羽.CFRP加固钢筋混凝土直剪承载力试验[J].建筑科学与工程学报,2015,32(06):43.
 LIN Feng,LI Yan-xiang,DONG Yu.Experiment on Shear Transfer Capacity of Reinforced Concrete Strengthened with CFRP[J].Journal of Architecture and Civil Engineering,2015,32(06):43.
[4]刘荣桂,平 舒,谢桂华,等.碳粉/二氧化硅对碳纤维增强复合材料温阻效应影响[J].建筑科学与工程学报,2017,34(06):36.
 LIU Rong-gui,PING Shu,XIE Gui-hua,et al.Influence of Carbon Powder/Silica on Thermo-resistive Effect of Carbon Fiber Reinforced Polymer[J].Journal of Architecture and Civil Engineering,2017,34(06):36.
[5]裴万吉,赵均海,魏雪英.钢管混凝土的截面形式及其承载力分析[J].建筑科学与工程学报,2006,23(01):49.
 PEI Wan-ji,ZHAO Jun-hai,WEI Xue-ying.Analysis of Section Types of Concrete-Filled Steel Tube and Its Load Capacity[J].Journal of Architecture and Civil Engineering,2006,23(06):49.
[6]周宏宇,袁 慧,邢晓帅,等.钢筋混凝土柱轴心受压动态破坏尺寸效应[J].建筑科学与工程学报,2019,36(05):62.
 ZHOU Hong-yu,YUAN Hui,XING Xiao-shuai,et al.Size Effect of Dynamic Failure of Reinforced Concrete Column Under Axial Compression[J].Journal of Architecture and Civil Engineering,2019,36(06):62.
[7]邓宗才,姚军锁.箍筋约束超高性能混凝土柱受压性能研究进展[J].建筑科学与工程学报,2020,37(01):14.[doi:10.19815/j.jace.2019.01046]
 DENG Zong-cai,YAO Jun-suo.Research Progress on Compressive Behavior of Stirrup-confined Ultra-high Performance Concrete Columns[J].Journal of Architecture and Civil Engineering,2020,37(06):14.[doi:10.19815/j.jace.2019.01046]

备注/Memo

备注/Memo:
收稿日期:2020-11-01 基金项目:中央高校基本科研业务费专项资金项目(CHD2010JC090) 作者简介:高小育(1973-),男,陕西西安人,讲师,工学博士,E-mail:xygao@chd.edu.cn。
更新日期/Last Update: 1900-01-01