|本期目录/Table of Contents|

[1]杨艳敏,胡挺益,张滨麟,等.基于钢板连接的夹芯墙板-钢框架装配式体系抗震性能[J].建筑科学与工程学报,2020,37(03):63-72.[doi:10.19815/j.jace.2019.04075]
 YANG Yan-min,HU Ting-yi,ZHANG Bin-lin,et al.Seismic Performance of Sandwich Wallboard-steel Frame Assembly System Based on Steel Plate Connection[J].Journal of Architecture and Civil Engineering,2020,37(03):63-72.[doi:10.19815/j.jace.2019.04075]
点击复制

基于钢板连接的夹芯墙板-钢框架装配式体系抗震性能(PDF)
分享到:

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
37卷
期数:
2020年03期
页码:
63-72
栏目:
出版日期:
2020-05-30

文章信息/Info

Title:
Seismic Performance of Sandwich Wallboard-steel Frame Assembly System Based on Steel Plate Connection
文章编号:
1673-2049(2020)03-0063-10
作者:
杨艳敏1胡挺益1张滨麟1王 勃1王小玉2
(1. 吉林建筑大学 土木工程学院,吉林 长春 130118; 2. 河南城建学院 土木与交通工程学院,河南 平顶山 467036)
Author(s):
YANG Yan-min1 HU Ting-yi1 ZHANG Bin-lin1 WANG Bo1 WANG Xiao-yu2
(1. School of Civil Engineering, Jilin Jianzhu University, Changchun 130118, Jilin, China; 2. School of Civil and Transportation Engineering, Henan University of Urban Construction, Pingdingshan 467036, Henan, China)
关键词:
钢板连接 钢框架 夹芯墙板 抗震性能 抗剪承载力 拟静力试验
Keywords:
steel plate connection steel frame sandwich wallboard seismic performance shear capacity pseudo-static test
分类号:
TU398
DOI:
10.19815/j.jace.2019.04075
文献标志码:
A
摘要:
为了研究基于钢板连接的夹芯墙板-钢框架体系的抗震性能,首先对钢板连接下的夹芯墙板与钢框架进行了抗剪性能试验,研究了连接钢板的抗剪性能,然后进行了1榀连接钢板厚度为3 mm夹芯墙板钢框架体系、1榀连接钢板厚度为6 mm夹芯墙板钢框架体系和1榀对比空框架体系的低周往复试验,分析了各试件的失效模式、滞回性能、耗能能力以及刚度退化规律等,最后综合评价其抗震性能。结果表明:连接钢板的平均抗剪承载力为59.8 kN,并且连接钢板的焊接质量会影响其受力性能,造成墙板框架体系正负向极限承载力的不对称,最大相差达到25.1%; 当连接钢板较薄时,连接件撕裂与开焊,除连接件附近混凝土开裂外,墙板基本完好; 当连接钢板较厚时,连接件基本完好,墙板斜对角开裂破坏,加厚钢板虽能提高体系的初始刚度,但延性有所降低; 增设墙板能提高主体框架的承载力、延性与耗能能力等,并且墙板与钢框架之间协调变形,表现出良好的整体性; 当水平位移较大时,墙板与框架形成对角斜撑机制; 研究成果可为后续开展夹芯墙板与框架相互作用机理的研究提供理论指导。
Abstract:
In order to study the seismic performance of sandwich wallboard-steel frame system based on steel plate connection, the shear performance test of sandwich wallboard and steel frame under steel plate connection was carried out, and the shear performance of the steel plate connection was studied. Then, one steel frame system of sandwich wallboard with thickness of 3 mm, one steel frame system of sandwich wallboard with thickness of 6 mm and one contrastive empty framework system were studied by low cycle reciprocating test. The failure mode, hysteretic performance, energy dissipation capacity and stiffness degradation of each specimen were analyzed. Finally, the seismic performance was evaluated comprehensively. The results show that the average shear capacity of the connecting steel plate is 59.8 kN, and the welding quality of the connecting steel plate will affect its mechanical performance, which will cause the asymmetry of the positive and negative ultimate bearing capacity of the wallboard frame system, with the maximum difference of 25.1%. When the connecting steel plate is thin, the connecting parts are torn and welded, except for the concrete cracking near the connecting parts, the wallboard is basically in good condition. When the connecting steel plate is thick, the connecting parts are basically intact and the wall plate cracks diagonally. In addition, the thickening steel plate can improve the initial stiffness of the system, but the ductility is reduced. Adding wallboard can improve the bearing capacity,ductility and energy dissipation capacity of the main frame. And the coordinated deformation between wallboard and steel frame shows a good integrity. When the horizontal displacement is large, the diagonal oblique brace mechanism is formed between the wallboard and the frame, which can provide theoretical guidance for the subsequent research of the interaction mechanism between the sandwich wallboard and the frame.

参考文献/References:

[1] 吴函恒,秦沛远,陈军武,等.水平荷载作用下钢框架-预制混凝土抗侧力墙体装配式结构的简化计算方法[J].建筑科学与工程学报,2016,33(3):86-92.
WU Han-heng,QIN Pei-yuan,CHEN Jun-wu,et al.Simplified Calculation Method of Steel Frame-prefabricated Concrete Lateral Force Resisting Wall Structures Under Lateral Load[J].Journal of Architecture and Civil Engineering,2016,33(3):86-92.
[2]齐宝库,朱 娅,马 博,等.装配式建筑综合效益分析方法研究[J].施工技术,2016,45(4):39-43.
QI Bao-ku,ZHU Ya,MA Bo,et al.Analytic Method Study of Comprehensive Benefit of Precast Building[J].Construction Technology,2016,45(4):39-43.
[3]刘 鹏,陈 颖,罗小勇,等.装配式建筑混凝土构件公差控制国内外标准分析[J].建筑科学与工程学报,2018,35(6):41-49.
LIU Peng,CHEN Ying,LUO Xiao-yong,et al.Tolerance Control Analysis of Concrete Member for Prefabricated Construction in Domestic and International Standards[J].Journal of Architecture and Civil Engineering,2018,35(6):41-49.
[4]ASTM C236-89,Standard Text Method for Steady-state Thermal Performance of Building Assemblies by Means of a Guarded Hot Box[S].
[5]TOMLINSON D,FAM A.Experimental Investigation of Precast Concrete Insulated Sandwich Panels with Glass Fiber-reinforced Polymer Shear Connectors[J].ACI Structural Journal,2014,111(3):595-606.
[6]NAITO C,BEACRAFT M,HOEMANN J M,et al.Performance and Characterization of Shear Ties for Use in Insulated Precast Concrete Sandwich Wall Panels[J].Journal of Structural Engineering,2012,138(1):52-61.
[7]WU G,WANG X,WU Z,et al.Durability of Basalt Fibers and Composites in Corrosive Environments[J].Journal of Composite Materials,2014,49(7):873-887.
[8]孟宪宏,周阿龙,刘海成,等.夹心保温外墙板连接件力学性能试验[J].沈阳建筑大学学报:自然科学版,2014,130(2):227-234.
MENG Xian-hong,ZHOU A-long,LIU Hai-cheng,et al.Experiments of Mechanical Properties on the Connectors Sandwich Insulation Wallboard[J].Journal of Shenyang Jianzhu University:Natural Science,2014,130(2):227-234.
[9]侯和涛,吴明磊,邱灿星,等.钢框架与节能复合墙板连接方式的试验研究[J].山东大学学报:工学版,2012,42(3):73-80.
HOU He-tao,WU Ming-lei,QIU Can-xing,et al.Experimental Research on Connections of Steel Frames and Energy-saving Composite Panels[J].Journal of Shandong University:Engineering Science,2012,42(3):73-80.
[10]张爱林,马 林,刘学春,等.装配式外挂墙板钢框架受力性能有限元分析[J].建筑结构学报,2016,37(增1):152-157.
ZHANG Ai-lin,MA Lin,LIU Xue-chun,et al.Finite Element Analysis on Mechanical Performance of Steel Frame Structure with Prefabricated External Wall Panel[J].Journal of Building Structures,2016,37(S1):152-157.
[11]郭宏超,孙立建,刘云贺,等.柔性钢框架外挂再生混凝土墙结构抗震性能试验研究[J].建筑结构学报,2017,38(2):63-73.
GUO Hong-chao,SUN Li-jian,LIU Yun-he,et al.Experimental Study on Seismic Behavior of Flexible Steel Frame with Recycled Concrete External Wall[J].Journal of Building Structures,2017,38(2):63-73.
[12]冯燕军.纤维混凝土可更换式墙板填充钢框架结构抗震性能试验研究[J].工业建筑,2016,46(8):140-144,114.
FENG Yan-jun.Experimental Study of Seismic Behavior of Replaceable Fiber Concrete Wall Infilled Steel Frame[J].Industrial Construction,2016,46(8):140-144,114.
[13]邱增美,李帼昌,杨志坚,等.蒸压轻质加气混凝土外墙板与钢梁连接节点的抗震性能试验研究[J].工业建筑,2017,47(3):163-168.
QIU Zeng-mei,LI Guo-chang,YANG Zhi-jian,et al.Experimental Study on Seismic Behavior of Connections Between Autoclaved Lightweight Aerated Concrete External Wall Panels and Steel Beams[J].Industrial Construction,2017,47(3):163-168.
[14]刘学春,周小俊,张译文.外挂整体装配式墙体及连接抗震性能研究[J].工业建筑,2017,47(7):34-39,33.
LIU Xue-chun,ZHOU Xiao-jun,ZHANG Yi-wen.Experimental Study of Seismic Performance of Integral Assembled Cladding Panels and Connections[J].Industrial Construction,2017,47(7):34-39,33.
[15]吴函恒,周天华,吕 晶.钢框架-装配式混凝土抗侧力墙板结构受力性能[J].东南大学学报:自然科学版,2016,46(1):118-125.
WU Han-heng,ZHOU Tian-hua,LU Jing.Mechanical Behavior of Steel Frame-fabricated Concrete Lateral Force Resisting Wall Structures[J].Journal of Southeast University:Natural Science Edition,2016,46(1):118-125.
[16]魏文晖,徐沛韬,高 湛,等.框架-嵌入式墙体结构抗震性能试验研究与有限元分析[J].建筑结构学报,2017,38(5):92-99.
WEI Wen-hui,XU Pei-tao,GAO Zhan,et al.Experimental and Analytical Study on Seismic Performance of Frame-embedded Walls[J].Journal of Building Structures,2017,38(5):92-99.
[17]王小玉.内嵌轻质夹芯外墙板钢框架抗震性能试验研究[D].长春:吉林建筑大学,2017.
WANG Xiao-yu.Experimental Study on Seismic Behavior of Steel Frame with Embedded Lightweight Sandwich Panels[D].Changchun:Jilin Jianzhu University,2017.
[18]杨艳敏,章润涛,王小玉.全轻混凝土剪力墙抗震性能试验研究[J].地震工程与工程振动,2017,37(5):96-102.
YANG Yan-min,ZHANG Run-tao,WANG Xiao-yu.All-lightweight Aggregate Concrete Shear Wall Seismic Performance[J].Earthquake Engineering and Engineering Dynamics,2017,37(5):96-102.
[19]杨艳敏,王小玉,黄志明,等.钢框架内嵌外墙板连接件抗剪性能研究[J].混凝土,2018(6):141-143.
YANG Yan-min,WANG Xiao-yu,HUANG Zhi-ming,et al.Research on Connecting Members Between Steel Frame and Embedded Wall Panel[J].Concrete,2018(6):141-143.
[20]唐 伟,胡夏闽,王家骥,等.节能墙板对RC框架抗震性能影响的试验研究[J].世界地震工程,2017,33(1):137-143.
TANG Wei,HU Xia-min,WANG Jia-ji,et al.Experiment Study on Influence of Energy Saving Wall Board on Seismic Behavior of RC Frames[J].World Earthquake Engineering,2017,33(1):137-143.
?

相似文献/References:

[1]袁晓洒,郑宏,于长亮.钢框架内填钢板深梁协同分析[J].建筑科学与工程学报,2012,29(02):43.
 YUAN Xiao-sa,ZHENG Hong,YU Chang-liang.Interactive Analysis of Steel Deep Beam Infilling Steel Frame[J].Journal of Architecture and Civil Engineering,2012,29(03):43.
[2]薛松领,沈锐利,张 也.基于负刚度理论的新型减震器试验[J].建筑科学与工程学报,2019,36(04):102.
 XUE Song-ling,SHEN Rui-li,ZHANG Ye.Experiment on New Type of Passive Vibration Isolator Based on Negative Stiffness Theory[J].Journal of Architecture and Civil Engineering,2019,36(03):102.

备注/Memo

备注/Memo:
收稿日期:2019-07-29
基金项目:国家重点研发计划项目(2017YFC0806100); 国家应急管理部安全事故防治科技项目(jilin-0001-2018AQ); 吉林省教育厅“十三五”科学技术研究规划项目(JJKH20190872KJ)
作者简介:杨艳敏(1969-),女,吉林长春人,教授,E-mail:282872984@qq.com。
更新日期/Last Update: 2020-06-08