«上一篇/Previous Article|本期目录/Table of Contents|下一篇/Next Article»

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:

27卷

期数:

2010年03期

页码:

109-114

栏目:

出版日期:

2010-09-20

文章信息/Info

Title:

Research on Bearing Capacity and Slit Parameters of Steel Plate Shear Wall with Slits

作者:

陈以一¹,蒋路²

1. 同济大学 土木工程防灾国家重点实验室,上海 200092; 2. 上海宝钢建筑工程设计研究院,上海 201900

Author(s):

CHEN Yi-yi¹, JIANG Lu²

1. State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University, Shanghai 200092, China; 2. Shanghai Baosteel Construction Design & Research Institute, Shanghai 201900, China

关键词:

带缝钢板剪力墙;  强度;  稳定;  先塑性后屈曲;  极限承载力

Keywords:

steel plate shear wall with slit;  strength;  stability;  buckling occurring after plasticity;  ultimate bearing capacity

分类号:

TU392.4

DOI:

-

文献标志码:

A

摘要:

介绍了带缝钢板剪力墙的屈服承载力、极限承载力、屈曲承载力的理论计算公式,对承载力理论计算公式进行了比较和分析,并在大量的有限元计算结果基础上,得到了确保带缝钢板剪力墙“先塑性后屈曲”的构造措施以及钢板墙外围尺寸和开缝参数的设计建议值。结果表明:考虑材料强化对带缝钢板剪力墙的极限承载力有近10%的提高; 中间壁高度会影响柱状部的塑性发展程度; 竖缝对钢板剪力墙的屈曲荷载有30%～40%的降低影响。

Abstract:

The theoretical calculation formulas of yield capacity, ultimate bearing capacity and buckling capacity of steel plate shear wall with slits(SPWS)were introduced. These theoretical calculation formulas of bearing capacities were compared and analyzed. Based on a lot of finite element calculation results, the detailed constructional measures to ensure “buckling occurring after plasticity” of SPWS were given. The results show that considering material hardening can rise about 10% ultimate bearing capacity of SPWS. The height of middle wall will affect the plastic development degree of SPWS. Vertical slits can decrease 30% to 40% buckling load of steel plate shear walls.

参考文献/References:

[1] HITAKA T,MATSUI C.Experimental Study on Steel Shear Wall with Slits[J].Journal of Structural En-gineering,2003,129(5):586-595.
[2]蒋 路,陈以一,汪文辉,等.足尺带缝钢板剪力墙低周往复加载试验研究Ⅰ[J].建筑结构学报,2009,30(5):57-64. JIANG Lu,CHEN Yi-yi,WANG Wen-hui,et al.Experimental Study on Full Scale Steel Plate Shear Wall with Slits Under Low-frequency Cyclic Loads:Part Ⅰ[J].Journal of Building Structures,2009,30(5):57-64.
[3]蒋 路,陈以一,卞宗舒.足尺带缝钢板剪力墙低周往复加载试验研究Ⅱ[J].建筑结构学报,2009,30(5):65-71. JIANG Lu,CHEN Yi-yi,BIAN Zong-shu.Experimental Study on Full Scale Steel Plate Shear Wall with Slits Under Low-frequency Cyclic Loads:Part Ⅱ[J].Journal of Building Structures,2009,30(5):65-71.
[4]曹春华,郝际平,王迎春,等.开缝薄钢板剪力墙低周反复荷载试验研究[J].西安建筑科技大学学报:自然科学版,2008,40(1):46-52. CAO Chun-hua,HAO Ji-ping,WANG Ying-chun,et al.Cyclic Test of Thin Steel Plate Shear Wall with Slits[J].Journal of Xi'an University of Architecture & Technology:Natural Science Edition,2008,40(1):46-52.
[5]温沛刚.带缝钢板剪力墙的理论分析和试验研究[D].广州:华南理工大学,2004. WEN Pei-gang.The Theoretical Analysis and Experimental Study of Steel Shear Wall with Slit[D].Guangzhou:South China University of Technology,2004.

相似文献/References:

[1]蒋路,陈以一,王伟栋.带缝钢板剪力墙弹性抗侧刚度及简化模型研究[J].建筑科学与工程学报,2010,27(03):115.
　JIANG Lu,CHEN Yi-yi,WANG Wei-dong.Research on Elastic Lateral Stiffness and Simplified Model of Steel Plate Shear Wall with Slits[J].Journal of Architecture and Civil Engineering,2010,27(03):115.
[2]蒋路.带缝钢板剪力墙应用技术分析[J].建筑科学与工程学报,2012,29(02):118.
　JIANG Lu.Analysis of Application Techniques of Steel Plate Shear Wall with Slits[J].Journal of Architecture and Civil Engineering,2012,29(03):118.
[3]吴迪,武岳.圆孔蜂窝梁的力学性能[J].建筑科学与工程学报,2007,24(01):47.
　WU Di,WU Yue.Mechanical Properties of Circular-hole Castellated Beams[J].Journal of Architecture and Civil Engineering,2007,24(03):47.
[4]陈宝春,韦建刚,苏家战,等.超高性能混凝土应用进展[J].建筑科学与工程学报,2019,36(02):10.
　CHEN Bao-chun,WEI Jian-gang,SU Jia-zhan,et al.State-of-the-art Progress on Application of Ultra-high Performance Concrete[J].Journal of Architecture and Civil Engineering,2019,36(03):10.
[5]周 峰,许 勇,朱 锐,等.砂性地层注浆浆液扩散特性[J].建筑科学与工程学报,2020,37(05):182.[doi:10.19815/j.jace.2019.11083]
　ZHOU Feng,XU Yong,ZHU Rui,et al.Diffusion Characteristics of Grouting Slurry in Sandy Stratum[J].Journal of Architecture and Civil Engineering,2020,37(03):182.[doi:10.19815/j.jace.2019.11083]
[6]谢开仲,刘振威,朱茂金,等.不同石粉含量的机制砂混凝土高温后力学性能[J].建筑科学与工程学报,2021,38(03):80.[doi:10.19815/j.jace.2020.09070]
　XIE Kai-zhong,LIU Zhen-wei,ZHU Mao-jin,et al.Mechanical Properties of Manufactured Sand Concrete with Different Stone Powder Content After High Temperatures[J].Journal of Architecture and Civil Engineering,2021,38(03):80.[doi:10.19815/j.jace.2020.09070]
[7]杨 坤,郭书慧,王亚昆,等.新型多螺旋复合箍筋约束混凝土方柱的轴压性能试验研究[J].建筑科学与工程学报,2023,40(04):80.[doi:10.19815/j.jace.2021.10071]
　YANG Kun,GUO Shuhui,WANG Yakun,et al.Experimental study on axial compression performance of square concrete column confined with new multi-spiral composite stirrups[J].Journal of Architecture and Civil Engineering,2023,40(03):80.[doi:10.19815/j.jace.2021.10071]

备注/Memo

备注/Memo:

收稿日期:2010-07-03
基金项目:国际钢铁协会Living Steel项目(D07EBEJ200)
作者简介:陈以一(1955-),男,浙江天台人,教授,博士研究生导师,工学博士,E-mail:yiyichen@mail.tongji.edu.cn。

常用功能

更新日期/Last Update: 2010-09-20