|本期目录/Table of Contents|

[1]刘晶波,陈鸣,刘祥庆,等.低层冷弯薄壁型钢结构住宅整体性能分析[J].建筑科学与工程学报,2008,25(04):6-12.
　LIU Jing-bo,CHEN Ming,LIU Xiang-qing,et al.Integral Behavior Analysis of Cold-formed Thin-walled Steel Framing System of Low-rise Residential Buildings[J].Journal of Architecture and Civil Engineering,2008,25(04):6-12.
点击复制

低层冷弯薄壁型钢结构住宅整体性能分析(PDF)
分享到：

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
25卷
期数:
2008年04期
页码:
6-12
栏目:
出版日期:
2008-12-20

文章信息/Info

Title:
Integral Behavior Analysis of Cold-formed Thin-walled Steel Framing System of Low-rise Residential Buildings
作者:
刘晶波，陈鸣，刘祥庆，郭冰，李杰
清华大学土木工程系,北京100084
Author(s):
LIU Jing-bo, CHEN Ming, LIU Xiang-qing, GUO Bing, LI Jie
Department of Civil Engineering, Tsinghua University, Beijing 100084, China
关键词:
冷弯薄壁型钢;  整体性能分析;  有限元方法;  相对刚度法
Keywords:
cold-formed thin-walled steel;  integralbehavior analysis;  finite element method;  method of relative stiffness
分类号:
TU311.3
DOI:
-
文献标志码:
A
摘要:
基于有限元方法建立了典型低层冷弯薄壁型钢结构住宅的整体模型,通过计算分析得到了结构的模态,并获得了风荷载和地震荷载作用下结构的内力、变形和墙体剪力。通过改变楼板平面内刚度,验证了相对刚度法中楼板平面内无限刚性假设的合理性; 并建议针对形体复杂的低层冷弯薄壁型钢结构,应采用有限元整体建模的方法求解墙体剪力。结果表明,低层冷弯薄壁型钢结构具有良好的整体性能,在抗震设防烈度为6度的地区可以满足承载力和变形的要求,且安全储备充足。
Abstract:
Based on finite element analysis method, a typical cold-formed thin-walled steel framing system of low-rise residential buildings was modeled. Authors analyzed internal forces, deformations and shear forces in walls of the building under wind load and earthquake load. Finally, the hypothesis of in-plane infinite stiff floor in the method of relative stiffness was inspected by changing the in-plane stiffness of the floor. Authors suggested that the finite element method should be used to calculate shear forces in walls of the structures with complicated shapes. The results indicate that the cold-formed thin-walled steel framing system has a well integral behavior and can accommodate the demands of load and deformation capacity in areas with earthquake intensity Ⅵ.

参考文献/References:

[1] 殷惠光,张跃峰.冷弯薄壁型钢建筑体系的墙架结构设计[J].工程建设与设计,2004(12):8-10. YIN Hui-guang,ZHANG Yue-feng.Design of Thin-wall Panal in Cold-formed Steel Frame [J].Construction & Design for Project,2004(12):8-10.
[2]周绪红,石 宇,周天华,等.低层冷弯薄壁型钢结构住宅体系[J].建筑科学与工程学报,2005,22(2):1-14. ZHOU Xu-hong,SHI Yu,ZHOU Tian-hua,et al.Cold-formed Steel Framing System of Low-rise Residential Building[J].Journal of Architecture and Civil Engineering,2005,22(2):1-14.
[3]GB 50018-2002,冷弯薄壁型钢结构技术规范[S]. GB 50018-2002,Technical Code of Cold-formed Thin-walled Steel Structures[S].
[4]孙 彤,王士奇.中美冷成型钢结构设计规范的比较[J].钢结构,2006,21(2):77-79. SUN Tong,WANG Shi-qi.Comparison of Chinese Code with North American Code of Cold-formed Steel Structural Members[J].Steel Construction,2006,21(2):77-79.
[5]周天华,何保康,周绪红,等.高强冷弯薄壁型钢轴压长柱受力性能试验研究[J].建筑科学与工程学 报,2005,22(4):65-71. ZHOU Tian-hua,HE Bao-kang,ZHOU Xu-hong,et al.Experimental Research on Bearing Capacity of High-strength Cold-formed Thin-walled Steel Long Columns[J].Journal of Architecture and Civil Engin-eering,2005,22(4):65-71.
[6]李元齐,沈祖炎,王 磊,等.屈服强度550 MPa高强冷弯薄壁型钢结构轴压构件承载力计算模式研究[J].建 筑结构学报,2006,27(3):18-25. LI Yuan-qi,SHEN Zu-yan,WANG Lei,et al.Analysis Method for Load-carrying Capacity of 550 MPa High-strength Cold-formed Thin-walled Steel Columns Subjected to Axial Compression[J].Journal of Building Structures,2006,27(3):18-25.
[7]沈祖炎,李元齐,王 磊,等.屈服强度550 MPa高强冷弯薄壁型钢结构轴心受压构件可靠度分析[J].建筑结 构学报,2006,27(3):26-33. SHEN Zu-yan,LI Yuan-qi,WANG Lei,et al.Reliability Analysis of 550 MPa High-strength Cold- formed Thin-walled Steel Structures[J].Journal of Building Structures,2006,27(3):26-33.
[8]周天华,何保康,周绪红,等.高强冷弯薄壁型钢轴压短柱受力性能试验研究[J].建筑科学与工程学 报,2005,22(3):36-44. ZHOU Tian-hua,HE Bao-kang,ZHOU Xu-hong,et al.Experimental Research on Bearing Capacity of High-strength Cold-formed Steel Stub Columns[J].Journal of Architecture and Civil Engineering,2005,22(3):36-44.
[9]周绪红,李艳敏,石 宇,等.竖向荷载作用下冷弯薄壁型钢墙架柱的承载力[J].建筑科学与工程学 报,2006,23(3):7-13. ZHOU Xu-hong,LI Yan-min,SHI Yu,et al.Bearing Capacity of Cold-formed Thin-walled Steel Wall Stud Under Vertical Load[J].Journal of Architecture and Civil Engineering,2006,23(3):7-13.
[10]周绪红,石 宇,周天华,等.冷弯薄壁型钢结构住宅组合墙体受剪性能研究[J].建筑结构学报,2006,27 (3):42-47. ZHOU Xu-hong,SHI Yu,ZHOU Tian-hua,et al.Study on Shear Resistance of Cold-formed Steel Stud Walls in Residential Structures[J].Journal of Building Structures,2006,27(3):42-47.
[11]崔 佳,谌红荣,龙莉萍.制作及安装误差对冷弯薄壁C型钢轴心压杆承载力的影响[J].工业建筑,2006,36 (7):79-82. CUI Jia,CHEN Hong-rong,LONG Li-ping.The Effect of Facture and Fixing Error on Bearing Cap- acity of Cold-formed Thin-walled C Steel Column[J].Industrial Construction,2006,36(7):79-82.
[12]胡白香,刘永娟,曲鹏远,等.腹板开孔的冷弯槽形轴压构件试验研究[J].实验力学,2006,21(3):329-333. HU Bai-xiang,LIU Yong-juan,QU Peng-yuan,et al.Experimental Study of Cold-formed Lipped Channel Member with Web Perforation Subjected to Axial Compression[J].Journal of Experimental Mechanics,2006,21(3):329-333.
[13]殷惠光,张跃峰.《低层冷弯薄壁型钢建筑技术规程》编制背景[J].工程建设与设计,2004(7):24-26. YIN Hui-guang,ZHANG Yue-feng.The Establishment Background of Technical Specification for Cold -formed Thin-walled Steel Framing Low-rise Structures[J].Construction & Design for Project,2004(7):24-26.

相似文献/References:

[1]高婷婷,周绪红,刘永健,等.采用GB 50018—2002计算壁厚小于2 mm的受弯构件承载力的适用性分析[J].建筑科学与工程学报,2013,30(04):91.
　GAO Ting-ting,ZHOU Xu-hong,LIU Yong-jian,et al.Applicability Analysis of Bear Capacity of Flexural Members with Thickness Less than 2 mm Calculated Using GB 50018—2002[J].Journal of Architecture and Civil Engineering,2013,30(04):91.
[2]石 宇,王身伟,刘永健.冷弯薄壁型钢单颗自攻螺钉抗剪连接性能研究[J].建筑科学与工程学报,2014,31(02):57.
[3]石宇,周绪红,刘永健.冷弯薄壁卷边槽钢偏心受压构件承载力计算的折减强度法[J].建筑科学与工程学报,2011,28(03):40.
　SHI Yu,ZHOU Xu-hong,LIU Yong-jian.Strength-reduction Method for Load-carrying Capacity of Cold-formed Thin-walled Lipped Channel Members Under Eccentric Compression[J].Journal of Architecture and Civil Engineering,2011,28(04):40.
[4]刘向斌,周天华,聂少锋,等.冷弯薄壁型钢开口三肢拼合立柱轴压性能有限元分析[J].建筑科学与工程学报,2011,28(03):119.
　LIU Xiang-bin,ZHOU Tian-hua,NIE Shao-feng,et al.Finite Element Analysis of Cold-formed Thin-walled Steel Three Open Limbs Built-up Columns Under Axial Compression[J].Journal of Architecture and Civil Engineering,2011,28(04):119.
[5]聂少锋,周天华,熊智刚,等.冷弯薄壁型钢开洞组合墙体抗剪性能研究[J].建筑科学与工程学报,2012,29(01):101.
　NIE Shao-feng,ZHOU Tian-hua,XIONG Zhi-gang,et al.Research on Shear Resistance Behavior of Cold-formed Thin-walled Steel Composite Walls with Opening[J].Journal of Architecture and Civil Engineering,2012,29(04):101.
[6]刘向斌,周天华,何鑫,等.冷弯薄壁型钢住宅结构整体扭转效应分析[J].建筑科学与工程学报,2012,29(02):83.
　LIU Xiang-bin,ZHOU Tian-hua,HE Xin,et al.Analysis of Torsional Effect of Cold-formed Thin-walled Steel Residence Structure[J].Journal of Architecture and Civil Engineering,2012,29(04):83.
[7]周绪红,李喆,刘永健,等.冷弯薄壁型钢拼合截面柱轴压承载力计算[J].建筑科学与工程学报,2012,29(04):1.
　ZHOU Xu-hong,LI Zhe,LIU Yong-jian,et al.Calculation Method for Bearing Capacity of Cold-formed Steel Built-up Columns Under Axial Compression[J].Journal of Architecture and Civil Engineering,2012,29(04):1.
[8]周绪红,李艳敏,石宇,等.竖向荷载作用下冷弯薄壁型钢墙架柱的承载力[J].建筑科学与工程学报,2006,23(03):7.
　ZHOU Xu-hong,LI Yan-min,SHI Yu,et al.Bearing Capacity of Cold-Formed Thin-WalledSteel Wall Stud Under Vertical Load[J].Journal of Architecture and Civil Engineering,2006,23(04):7.
[9]管 宇,周绪红,石 宇,等.多层冷弯薄壁型钢住宅体系动力时程分析[J].建筑科学与工程学报,2018,35(05):142.
　GUAN Yu,ZHOU Xu-hong,SHI Yu,et al.Dynamic Time History Analysis for Mid-rise Cold-formed Thin-walled Steel Residential Building System[J].Journal of Architecture and Civil Engineering,2018,35(04):142.
[10]姚欣梅,周绪红,张 辉,等.冷弯薄壁型钢C形梁受剪性能分析[J].建筑科学与工程学报,2018,35(05):152.
　YAO Xin-mei,ZHOU Xu-hong,ZHANG Hui,et al.Shear Behavior Analysis of Cold-formed Thin-walled Steel C-shape Beam[J].Journal of Architecture and Civil Engineering,2018,35(04):152.

备注/Memo

备注/Memo:
收稿日期:2008-07-15
基金项目:国家重点基础研究发展计划(“九七三”计划)项目(2007CB714203)
作者简介:刘晶波(1956-),男,辽宁新宾人,教授,博士研究生导师,工学博士,E-mail:liujb@tsinghua.edu.cn。
更新日期/Last Update: 2008-12-20