|本期目录/Table of Contents|

[1]张蕾,周天华,桑刘睿,等.四边简支螺钉拼合薄钢板的屈曲后强度计算[J].建筑科学与工程学报,2025,42(02):82-92.[doi:10.19815/j.jace.2023.04147]
　ZHANG Lei,ZHOU Tianhua,SANG Liurui,et al.Calculation of post-buckling strength of simply supported screw built-up thin steel plate[J].Journal of Architecture and Civil Engineering,2025,42(02):82-92.[doi:10.19815/j.jace.2023.04147]
点击复制

四边简支螺钉拼合薄钢板的屈曲后强度计算(PDF)
分享到：

《建筑科学与工程学报》[ISSN:1673-2049/CN:61-1442/TU]

卷:
42卷
期数:
2025年02期
页码:
82-92
栏目:
建筑结构
出版日期:
2025-03-20

文章信息/Info

Title:
Calculation of post-buckling strength of simply supported screw built-up thin steel plate
文章编号:
1673-2049(2025)02-0082-11
作者:
张蕾,周天华,桑刘睿,王帅兵
(长安大学 建筑工程学院,陕西 西安 710061)
Author(s):
ZHANG Lei, ZHOU Tianhua, SANG Liurui, WANG Shuaibing
(School of Civil Engineering, Chang'an University, Xi'an 710061, Shaanxi, China)
关键词:
冷弯薄壁型钢;  螺钉拼合薄钢板;  能量法;  背靠背截面拼合柱;  轴压试验
Keywords:
cold-formed steel;  screw built-up thin steel plate;  energy principle;  back-to-back built-up column;  axial compression test
分类号:
TU392.5
DOI:
10.19815/j.jace.2023.04147
文献标志码:
A
摘要:
为研究冷弯薄壁型钢螺钉拼合薄钢板的屈曲后强度,对自攻螺钉连接的21根冷弯薄壁型钢背靠背截面拼合柱进行轴压试验研究,并采用ABAQUS有限元软件对试件开展数值模拟分析。在此基础上,以背靠背截面立柱的拼合腹板为研究对象,考虑板件连接界面的剪切滑移变形和自攻螺钉对拼合板件的约束作用,建立螺钉拼合薄钢板屈曲后应力的计算模型,提出四边简支螺钉拼合薄钢板屈曲后应力的解析式。为扩大该式的适用范围,对其进行修正,并通过试验和有限元结果对比,进行适用性分析评价。结果表明:有限元分析结果与试验结果的相对误差控制在10%以内,数值模型可以较好地反映试件在轴压条件下的变形破坏特征,模型具有较高的准确性; 随着板件宽厚比的增加,提出的螺钉拼合薄钢板屈曲后应力解析式计算结果趋于保守; 在常见的冷弯薄壁型钢拼合板件宽厚比变化范围内,经过修正的螺钉拼合薄钢板屈曲后应力计算结果与试验结果吻合良好,表明修正的解析式具有较好的准确性和适用性。
Abstract:
To investigate the post-buckling strength of screw built-up thin steel plate, axial compression tests were carried out on 21 cold-formed steel back-to-back built-up columns with self-drilling screw connections, and numerical simulation analysis of the specimens was carried out using ABAQUS finite element software. On the basis, taking the built-up web of the back-to-back section column as the research object, considering the shear slip deformation of the screw-plate connection interface and the constraint effect of the self-drilling screw on the built-up plate, the calculation model for the post-buckling stress of the screw built-up thin steel plate was established and the analytical expression for the post-buckling stress of simply supported screw built-up thin steel plates was derived. In order to expand the applicability of the formula, it was modified and compared with experimental and finite element results to analyze and evaluate the applicability. The results show that the relative error between the finite element analysis and experimental results is controlled within 10%. The numerical model accurately reflects the deformation and failure characteristics of the specimens under axial compression and the model has high accuracy. With the increase of the built-up plate width-thickness ratio, the calculation results of the derived analytical expression for the post-buckling stress of the screw built-up thin steel plate tend to be conservative. Within the common range of changes in the width-thickness ratio of cold-formed steel built-up plates, the post-buckling stress calculation results of the modified screw built-up thin steel plate formula are in good agreement with the experimental results, indicating that the modified analytical expression has good accuracy and applicability.

参考文献/References:

[1] 陈 骥.钢结构稳定理论与设计[M].5版.北京:科学出版社,2011.
CHEN Ji. Stability of steel structures theory and design[M]. 5th ed. Beijing:Science Press, 2011.
[2]TIMOSHENKO S. Theory of elastic stability[M]. 2nd ed. New York: McGraw-hill, 1961.
[3]路 延,周天华,李文超,等.冷弯薄壁受压C形截面局部屈曲荷载和承载力[J].哈尔滨工业大学学报,2017,49(6):72-76.
LU Yan, ZHOU Tianhua, LI Wenchao, et al. The critical local buckling load and ultimate strength of cold-formed thin-walled C-sections under axial compression[J]. Journal of Harbin Institute of Technology, 2017, 49(6): 72-76.
[4]姚行友,李元齐,郭彦利.冷弯薄壁型钢卷边槽形截面构件非线性畸变屈曲承载力计算方法[J].中南大学学报(自然科学版),2015,46(8):3067-3074.
YAO Xingyou, LI Yuanqi, GUO Yanli. Nonlinear distortional-buckling strength estimation of cold-formed thin-walled steel members with lipped channel section[J]. Journal of Central South University(Science and Technology), 2015, 46(8): 3067-3074.
[5]姚行友,李 潇.冷弯薄壁型钢拼合工字形截面柱畸变屈曲及相关屈曲轴压性能试验与直接强度法研究[J].建筑钢结构进展,2021,23(12):33-46.
YAO Xingyou, LI Xiao. Tests and direct strength method on the distortional buckling and interactive buckling of cold-formed thin-walled steel built-up I-section columns under axial compression[J]. Progress in Steel Building Structures, 2021, 23(12): 33-46.
[6]李艳春,周天华,丁嘉豪,等.冷弯薄壁型钢拼合箱形柱的畸变屈曲性能研究[J].湖南大学学报(自然科学版),2021,48(11):91-100.
LI Yanchun, ZHOU Tianhua, DING Jiahao, et al. Investigation on distortion buckling behavior of cold-formed thin-walled steel built-up box-section columns[J]. Journal of Hunan University(Natural Sciences), 2021, 48(11): 91-100.
[7]周天华,李艳春,吴函恒,等.冷弯薄壁型钢拼合箱形截面短柱承载力叠加法[J].湖南大学学报(自然科学版),2020,47(11):46-55.
ZHOU Tianhua, LI Yanchun, WU Hanheng, et al. Superposition method for bearing capacity of cold-formed thin-walled steel built-up box section short columns[J]. Journal of Hunan University(Natural Sciences), 2020, 47(11): 46-55.
[8]路 延.冷弯薄壁型钢双肢开口拼合轴压柱失稳机理和承载力设计方法研究[D].西安:长安大学,2018.
LU Yan. Study on instability mechanism and bearing capacity design method of cold-formed thin-walled steel columns with two-limb split axial compression[D]. Xi'an: Chang'an University, 2018.
[9]周天华,聂少锋,刘向斌.冷弯薄壁型钢开口三肢拼合立柱轴压性能试验研究[J].建筑结构学报,2012,33(3):22-29.
ZHOU Tianhua, NIE Shaofeng, LIU Xiangbin. Experimental study on cold-formed steel three limbs built-up section members under axial compression[J]. Journal of Building Structures, 2012, 33(3): 22-29.
[10]LIAO F F, WU H H, WANG R Z, et al. Compression test and analysis of multi-limbs built-up cold-formed steel stub columns[J]. Journal of Constructional Steel Research, 2017, 128: 405-415.
[11]靳璐君.冷弯薄壁型钢C形/Z形/帽形截面轴压构件局部屈曲临界荷载统一计算方法[D].兰州:兰州大学,2020.
JIN Lujun. Unified calculation method of local buckling critical load of cold-formed thin-walled steel members with C-shaped/Z-shaped/hat-shaped sections under axial compression[D]. Lanzhou: Lanzhou University, 2020.
[12]ROY K, LAU H H, HUON TING T C, et al. Experiments and finite element modelling of screw pattern of self-drilling screw connections for high strength cold-formed steel[J]. Thin-walled Structures, 2019, 145: 106393.
[13]ROY K, TING T C H, LAU H H, et al. Effect of thickness on the behaviour of axially loaded back-to-back cold-formed steel built-up channel sections-experimental and numerical investigation[J]. Structures, 2018,16: 327-346.
[14]ROY K, TING T C H, LAU H H, et al. Nonlinear behaviour of back-to-back gapped built-up cold-formed steel channel sections under compression[J]. Journal of Constructional Steel Research, 2018,147: 257-276.
[15]ZHOU T H, LI Y C, REN L J, et al. Research on the elastic buckling of composite webs in cold-formed steel back-to-back built-up columns — part I: experimental and numerical investigation[J]. Structures, 2021, 30: 115-133.
[16]LI Y C, ZHOU T H, REN L J, et al. Elastic buckling of composite webs in back-to-back cold-formed steel built-up columns — part II:design formula[J]. Structures, 2021, 33: 3515-3525.
[17]MOJTABAEI S M, BECQUE J, HAJIRASOULIHA I. Local buckling in cold-formed steel moment-resisting bolted connections: behavior, capacity, and design[J]. Journal of Structural Engineering, 2020, 146(9): 04020167.
[18]钢及钢产品 力学性能试验取样位置及试样制备:GB/T 2975—2018[S].北京:中国标准出版社,2018.
Steel and steel products — location and preparation of samples and test pieces for mechanical testing: GB/T 2975—2018[S]. Beijing: Standards Press of China, 2018.
[19]金属材料 拉伸试验 第1部分:室温试验方法:GB/T 228.1—2021[S].北京:中国标准出版社,2021.
Metallic materials — tensile testing: part 1: method of test at room temperature: GB/T 228.1—2021[S]. Beijing: Standards Press of China, 2021.
[20]SANG L R, ZHOU T H, ZHANG L, et al. Experimental investigation on the axial compression behavior of cold-formed steel triple-limbs built-up columns with half open section[J]. Thin-walled Structures, 2022, 172: 108913.

相似文献/References:

[1]高婷婷,周绪红,刘永健,等.采用GB 50018—2002计算壁厚小于2 mm的受弯构件承载力的适用性分析[J].建筑科学与工程学报,2013,30(04):91.
　GAO Ting-ting,ZHOU Xu-hong,LIU Yong-jian,et al.Applicability Analysis of Bear Capacity of Flexural Members with Thickness Less than 2 mm Calculated Using GB 50018—2002[J].Journal of Architecture and Civil Engineering,2013,30(02):91.
[2]石 宇,王身伟,刘永健.冷弯薄壁型钢单颗自攻螺钉抗剪连接性能研究[J].建筑科学与工程学报,2014,31(02):57.
[3]石宇,周绪红,刘永健.冷弯薄壁卷边槽钢偏心受压构件承载力计算的折减强度法[J].建筑科学与工程学报,2011,28(03):40.
　SHI Yu,ZHOU Xu-hong,LIU Yong-jian.Strength-reduction Method for Load-carrying Capacity of Cold-formed Thin-walled Lipped Channel Members Under Eccentric Compression[J].Journal of Architecture and Civil Engineering,2011,28(02):40.
[4]刘向斌,周天华,聂少锋,等.冷弯薄壁型钢开口三肢拼合立柱轴压性能有限元分析[J].建筑科学与工程学报,2011,28(03):119.
　LIU Xiang-bin,ZHOU Tian-hua,NIE Shao-feng,et al.Finite Element Analysis of Cold-formed Thin-walled Steel Three Open Limbs Built-up Columns Under Axial Compression[J].Journal of Architecture and Civil Engineering,2011,28(02):119.
[5]聂少锋,周天华,熊智刚,等.冷弯薄壁型钢开洞组合墙体抗剪性能研究[J].建筑科学与工程学报,2012,29(01):101.
　NIE Shao-feng,ZHOU Tian-hua,XIONG Zhi-gang,et al.Research on Shear Resistance Behavior of Cold-formed Thin-walled Steel Composite Walls with Opening[J].Journal of Architecture and Civil Engineering,2012,29(02):101.
[6]刘向斌,周天华,何鑫,等.冷弯薄壁型钢住宅结构整体扭转效应分析[J].建筑科学与工程学报,2012,29(02):83.
　LIU Xiang-bin,ZHOU Tian-hua,HE Xin,et al.Analysis of Torsional Effect of Cold-formed Thin-walled Steel Residence Structure[J].Journal of Architecture and Civil Engineering,2012,29(02):83.
[7]周绪红,李喆,刘永健,等.冷弯薄壁型钢拼合截面柱轴压承载力计算[J].建筑科学与工程学报,2012,29(04):1.
　ZHOU Xu-hong,LI Zhe,LIU Yong-jian,et al.Calculation Method for Bearing Capacity of Cold-formed Steel Built-up Columns Under Axial Compression[J].Journal of Architecture and Civil Engineering,2012,29(02):1.
[8]刘晶波,陈鸣,刘祥庆,等.低层冷弯薄壁型钢结构住宅整体性能分析[J].建筑科学与工程学报,2008,25(04):6.
　LIU Jing-bo,CHEN Ming,LIU Xiang-qing,et al.Integral Behavior Analysis of Cold-formed Thin-walled Steel Framing System of Low-rise Residential Buildings[J].Journal of Architecture and Civil Engineering,2008,25(02):6.
[9]周绪红,李艳敏,石宇,等.竖向荷载作用下冷弯薄壁型钢墙架柱的承载力[J].建筑科学与工程学报,2006,23(03):7.
　ZHOU Xu-hong,LI Yan-min,SHI Yu,et al.Bearing Capacity of Cold-Formed Thin-WalledSteel Wall Stud Under Vertical Load[J].Journal of Architecture and Civil Engineering,2006,23(02):7.
[10]管 宇,周绪红,石 宇,等.多层冷弯薄壁型钢住宅体系动力时程分析[J].建筑科学与工程学报,2018,35(05):142.
　GUAN Yu,ZHOU Xu-hong,SHI Yu,et al.Dynamic Time History Analysis for Mid-rise Cold-formed Thin-walled Steel Residential Building System[J].Journal of Architecture and Civil Engineering,2018,35(02):142.

备注/Memo

备注/Memo:
收稿日期:2023-04-03
基金项目:国家自然科学基金项目(51878055); 中央高校基本科研业务费专项资金项目(300102282204)
作者简介:张 蕾(1993-),女,工学博士研究生,E-mail:zhangleio@chd.edu.cn。
通信作者:周天华(1963-),男,工学博士,教授,博士生导师,E-mail:zhouth@chd.edu.cn。
Author resumes: ZHANG Lei(1993-), female, doctoral student, E-mail: zhangleio@chd.edu.cn; ZHOU Tianhua(1963-), male, PhD, professor, E-mail: zhouth@chd.edu.cn.
更新日期/Last Update: 2025-03-20